Experience level will determine pay.

1st Shift - 6:30 AM - 2:30 PM

2nd Shift - 2:30 PM - 10:30 PM

3rd Shift - 10:30 PM - 6:30 AM

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

JOB SUMMARY

Hands on technician of a maintenance facilities crew; performing required or assigned task(s) to maximize, safety, quality, and efficiency of plant personnel and equipment.

DUTIES AND RESPONSIBILITIES

Maintain all facility equipment utilizing company and departmental policies. To include plumbing, pipe fitting, fabrication, High, medium, and low voltage systems. Fabricate, weld and install supports, brackets, fencing etc. as needed. Repair / replace overhead doors, levelers, dock locks, and outside dock lights. Install, relocate and maintain all lighting throughout the plant.
Maintain a situational awareness of the shop floor activities and anything that affects safety or production equipment.
Assist in the development of maintenance personnel, systems, and programs through training and continuous improvement processes
Support production; perform assigned work orders, and preventative maintenance, to maximize production efficiency.
Ensure all maintenance processes are followed and documented in accordance with company and department procedures/policies.
Effectively follow up on open issues and communicating to the supervisor or team leader any open issues not resolved during your shift.
Proactive in preventative and predictive maintenance by identifying problems during either production or planned maintenance downtime.
Perform other duties as directed by the supervisor or Superintendent.

EDUCATION AND EXPERIENCE

High School diploma or GED

Master Electrician Certified in TN or 10 year experience as an electrician

KNOWLEDGE, SKILLS AND ABILITIES

Proficient in welding, for pipe fitting, fabrication, structural steel, and general maintenance items
Operate heavy equipment, (loader, man lift, back hoe, etc.) as needed.
Strong mechanical skills to include overhead door repair and installation
Strong electrical skill to install high, medium, and low voltage equipment in “hot” environment.
Familiar with Tennessee and National Electrical Code.
Ability to isolate short circuits in long electrical run for medium and low voltage service.
Ability to make, terminate, troubleshoot, network cables (cat 5, 6,)
Carpentry, painting and maintenance skills for installing low voltage and network drops in office areas.
Concrete Finishing after floor repair or equipment relocation.
Ability to use all hand tools associate with electrical, pipe fitting, plumbing, and carpentry trades.
Ability to work independently or as a team.

PHYSICAL AND MENTAL REQUIREMENTS OF THE POSITION

Identify the physical and mental requirements of the position. You may chose from the list below and add any other requirements necessary to perform each of the essential job functions of the position.

Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands to handle, manipulate, or feel objects, tools or controls, reach with hands and arms, climb stairs, talk and hear
Employee must occasionally lift or move up to 50 pounds
While performing the duties of the job, the employee is exposed to weather conditions prevalent at the time
The noise level in the work environment is usually moderate
The ability to listen to and understand information and ideas presented through spoken words and sentences
The ability to communicate information and ideas in speaking so other will understand
The ability to concentrate on a task over a period of time without being distracted

You should be proficient in:

Blueprint Reading

Machines & technologies you'll use:

Servo Motors

Best Match

Within 40 miles

Facility Maintenance Technician

Spacely Sprockets

Welder

Simplex, Inc.

Manufacturing Intern

Modern Packaging, Inc.

Body Shop Technician

McMahon Truck Group, LLC

Mechanical Machine Builder. Benefits start day 1!!!

Modern Packaging, Inc.

Maintenance Mechanic

Genesis Products, LLC